Application

Airbag

Our solutions for deployment mechanisms in airbags guarantee fast and reliable deployment of airbags - with minimal space requirements. As your partner for ultra-fine wires, resistors and sensors in safety-relevant components, we offer you innovative technologies that meet the highest safety standards.

Airbag

Airbags as a key component for effective occupant protection

The importance of vehicle safety has increased significantly in recent decades. One of the first and most effective measures was the introduction of airbags.

In the event of an accident, the airbags deploy at lightning speed and cushion the impact, preventing serious injuries to the head and upper body. The immediate and absolutely reliable deployment of the airbags is crucial for the protection of the occupants.

Deployed_airbag_in_the_car

When every microsecond counts

Isabellenhütte supplies safety-relevant components and ultra-fine wires that are essential for the airbag deployment mechanism and have extremely low temperature coefficients due to their high-resistance special alloys.

Thanks to our high level of vertical integration, from melting to alloy-specific heat treatment of the final component, we ensure homogeneous electrophysical properties throughout. This means that you can rely on us completely.

Longevity

Extremely low error rates and high long-term stability.

Fastest ignition time

Shunt-based current measurement integrated in the conductor enables extremely fast detection and evaluation of measured values.

Maximum reliability

Low temperature coefficients for accurate and reliable measured value acquisition.

Our products for your airbags

If you cannot find a suitable product for your requirements here, please contact us.

CMK Resistor

2-terminal resistor for medium power requirements. Low TC <50ppm/K for the entire value range.

Product area: Resistor
Size: 1206
Power (Watt): 0.5 - 4
Tol (%): 1.00 - 5.00
Res (Ohm): 0.005 - 0.1

CMP Resistor

2-terminal resistor for medium power requirements. Low TC <50ppm/K for the entire value range.

Product area: Resistor
Size: 2010
Power (Watt): 1 - 2
Tol (%): 1.00 - 5.00
Res (Ohm): 0.01 - 0.5

CMS Resistor

2-terminal resistor for medium power requirements. Low TC <50ppm/K for the entire value range.

Product area: Resistor
Size: 2512
Power (Watt): 2 - 2.5
Tol (%): 1.00 - 5.00
Res (Ohm): 0.01 - 0.5

FMK Resistor

2-terminal resistor. Low resistance values <=6 milliohms. Good TC. Solid construction as metal plate. High pulse load.

Product area: Resistor
Size: 1206
Power (Watt): 1 - 3.5
Tol (%): 1.00 - 10.0
Res (Ohm): 0.002 - 0.006

FMP Resistor

2-terminal resistor. Low resistance values <=6 milliohms. Good TC. Solid construction as metal plate. High pulse load.

Product area: Resistor
Size: 2010
Power (Watt): 1 - 3.5
Tol (%): 1.00 - 5.00
Res (Ohm): 0.002 - 0.006

SMK Resistor

2-terminal resistor with large solder pads. Very powerful. Largest selection of resistor values up to 0.5 Ohm.

Product area: Resistor
Size: 1206
Power (Watt): 1 - 1.5
Tol (%): 1.00 - 5.00
Res (Ohm): 0.008 - 0.5

SMP Resistor

2-terminal resistor with large solder pads, very powerful. Largest selection of resistor values up to 1 Ohm.

Product area: Resistor
Size: 2010
Power (Watt): 2 - 3
Tol (%): 0.500 - 1.00
Res (Ohm): 0.005 - 1

SMS Resistor

2-terminal resistor with large solder pads. Very powerful. Largest selection of resistance values up to 1 Ohm.

Product area: Resistor
Size: 2512
Power (Watt): 3 - 5
Tol (%): 0.500 - 5.00
Res (Ohm): 0.005 - 1

SMT Resistor

2-terminal resistor with large solder pads. Very powerful. Largest selection of resistor values up to 4.7 Ohm.

Product area: Resistor
Size: 2817
Power (Watt): 5 - 7
Tol (%): 0.500 - 5.00
Res (Ohm): 0.004 - 4.7

VMK Resistor

2-terminal resistor. Standard solder pad geometry. Very low TC <20ppm/K for the entire value range. High continuous load, wide range of resistance values up to 470 mOhm.

Product area: Resistor
Size: 1206
Power (Watt): 1 - 1.5
Tol (%): 1.00 - 5.00
Res (Ohm): 0.01 - 0.47

VMP Resistor

2-terminal resistor. Standard solder pad geometry. Very low TC <20ppm/K for the entire value range. High continuous load. Wide range of resistance values up to 1 Ohm.

Product area: Resistor
Size: 2010
Power (Watt): 2 - 3
Tol (%): 1.00 - 5.00
Res (Ohm): 0.005 - 1

VMS Resistor

2-terminal resistor. Standard solder pad geometry. Very low TC <20ppm/K for the entire value range. High continuous load. Wide range of resistance values up to 1 Ohm.

Product area: Resistor
Size: 2512
Power (Watt): 3 - 4
Tol (%): 1.00 - 5.00
Res (Ohm): 0.005 - 1

No match!

Sorry, no products could be found for your selection.

Selected filters

No filters selected

You need additional information?

Then contact us. We will take care of your request.

contact
Contact